Treatment & installations · Ipswich & Suffolk

Treatment & installations — the work behind the reports

Photos taken on site during our own damp proofing and installation works across Ipswich, Suffolk, Essex and Norfolk. No stock images — this is our team fitting cavity drain membranes, waterproofing systems and replastering, start to finish.

19 years' experience · CSTDB & CSSW certified · All works guaranteed

On site

From our recent installations

Every photo below was taken during a real treatment or installation job. Ask us about any of them and we'll explain exactly what we installed and why.

Cavity drain membrane fixed to a wall with timber stud framework fitted over it, ready for boarding
Membrane installation

Cavity drain membrane with stud wall framework

Cavity drain membrane fixed across the wall with a treated timber stud framework built over it. The studs take the new wall boards while the membrane behind manages any moisture coming through the masonry.

Cavity drain membrane installed around a window with timber battens fixed over the system
Membrane installation

Membrane and battens around a window

The membrane system worked neatly around the window reveal with battens fixed over it, ready for the new wall lining. Every reveal and corner is detailed so the barrier stays continuous.

Wide view of a room with cavity drain membrane and timber studwork installed across the walls
Membrane installation

Full room membrane installation

A whole room lined with cavity drain membrane and studwork ahead of boarding and plastering — the walls are now isolated from the damp masonry behind.

Roll of ISO Therm thermal membrane being measured out in a room with damp-damaged plaster at skirting level
ISO Therm installation

ISO Therm membrane measured and cut

ISO Therm thermal membrane rolled out and cut to size on site. The old damp plaster has been stripped back and the wall prepared ready for the membrane to be applied.

ISO Therm thermal membrane applied to interior walls around a window and door during installation
ISO Therm installation

ISO Therm thermal membrane on the walls

ISO Therm thermal membrane applied across the walls. It warms the wall surface, which cuts down condensation and the mould that comes with it — ideal for cold external walls.

ISO Therm thermal membrane applied to hallway walls during remedial works
ISO Therm installation

ISO Therm through the hallway

The thermal membrane carried through the hallway walls as part of the same installation, keeping the whole area protected against condensation.

Room with exposed ceiling beams and ISO Therm thermal membrane applied to the walls
ISO Therm installation

ISO Therm in a beamed room

ISO Therm applied to the walls of a room with exposed oak beams — a breathable thermal layer that suits older properties where the walls need to stay warm and dry.

ISO Therm thermal membrane applied to walls around a doorway in a room with exposed beams
ISO Therm installation

Membrane detailed around doorways

The membrane worked carefully around the doorway and openings, ready for the finishing plaster skim over the top.

Positive input ventilation unit installed in a loft with ducting
Ventilation installation

Positive input ventilation unit in the loft

PIV unit installed in the loft space to bring filtered fresh air into the home and reduce condensation and mould.

Engineer fitting a ceiling ventilation diffuser on a landing
Ventilation installation

Fitting the ceiling diffuser

Installing the ceiling diffuser for a positive input ventilation system.

Ceiling ventilation diffuser with cover removed
Ventilation installation

Diffuser fitted to the ceiling

Diffuser fixed in place before the cover is fitted.

Finished ceiling ventilation diffuser on a landing
Ventilation installation

Finished ventilation diffuser

Completed positive input ventilation installation with a neat ceiling finish.

Damp proof course injection into exposed brickwork
Damp proofing

Damp proof course injection

Injecting a damp proof course into the brickwork to stop rising damp.

Cavity drain membrane fixed to a damp internal wall with plug fixings around a chimney breast during remedial works
Membrane installation

Damp membrane fixed to the walls

A cavity drain membrane mechanically fixed to a rising-damp affected wall around a chimney breast. The membrane separates the damp wall from the new finish so moisture can drain away harmlessly behind it.

Cavity drain membrane carried around a chimney breast corner with electrical socket boxes sealed through the membrane
Membrane installation

Membrane carried around every corner

The same installation taken around the chimney breast and into the room corners. Every socket and service point is cut in and sealed so the barrier behind stays continuous.

Cavity drain membrane sheets joined with sealed jointing strips during a damp proofing installation
Membrane installation

Sealed joints between membrane sheets

Where membrane sheets meet, the joints are sealed with jointing strip and rope so the cavity behind stays continuous. Getting this detail right is the difference between a system that works and one that fails.

Close-up of an electrical socket box carefully cut into and sealed through a cavity drain membrane
Detailing

Socket box sealed into the membrane

Every electrical box is cut in by hand and sealed back to the membrane. Small details like this keep the waterproof barrier unbroken around the services in the wall.

Insulated plasterboard fitted over a cavity drain membrane around a fireplace during a damp proofing installation
Installation

Insulated boards over the membrane

With the membrane complete, insulated plasterboard is fitted over it. This lifts the wall surface temperature too, which helps stop condensation forming on the finished wall.

Living room with cavity drain membrane and insulated plasterboard installed on the affected walls before plastering
Installation

Full room ready for plastering

The whole room lined with membrane and insulated boards ahead of plastering. The chimney breast and both damp-affected walls are now isolated from the moisture in the masonry behind.

Fresh renovating plaster skim applied over a damp proofing membrane installation on internal walls
Plastering

Renovating plaster applied

A salt-resistant renovating plaster skim finished over the system. It dries back to a normal painted finish — you would never know what is behind it.

Finished plastered walls after damp proofing treatment with ventilation air bricks reinstated at skirting level
Plastering

Finished walls with ventilation reinstated

The completed installation — smooth finished walls with the air bricks and ventilation paths reinstated at skirting level so the wall can keep breathing behind the new finish.

Type A cementitious tanking render applied to the brick retaining walls of a garage during waterproofing works
Waterproofing

Type A tanking to the retaining walls

A flexible Type A cementitious tanking system rendered across the brick retaining walls of a garage. The render bonds directly to the masonry and holds back moisture entering through the retaining side of the walls.

Flexible Type A tanking fillet seal formed at the wall and floor joint in the corner of a garage
Waterproofing

Flexible fillet seal at the wall and floor joint

The critical detail — a flexible fillet seal coved into the junction where the wall meets the floor. It lets the tanked surfaces move slightly without cracking, so the seal at the joint stays watertight.

Type A tanking fillet seal carried around a brick pier and along the wall and floor joint
Waterproofing

Fillet seal carried around every pier

The fillet seal is continued around piers, corners and buttresses — anywhere the wall and floor meet. Breaking the seal at a joint is the most common cause of tanking failures, so we form it continuously.

Garage interior with Type A tanking render applied part way up the retaining walls, ready for the render finish
Waterproofing

Tanked walls ready for the finish

The tanking render taken up the retaining walls under the timber floor above. The lower walls are now waterproofed — once cured, they're ready for the finishing render over the top.

Type A tanking render finished around a window reveal and corner in a garage retaining wall
Waterproofing

Tanking finished around the reveals

The system worked carefully around the window reveal and internal corners, keeping the tanking continuous across every change of plane in the wall.

Smooth render finish applied over a Type A tanking system on a garage retaining wall
Plastering

Render finish over the tanking

A smooth render finish applied over the cured Type A tanking. It gives a clean, paintable wall surface — the retaining walls are sealed and the room looks like any other finished space.

We add new photos as jobs complete — check back, or ask to see more examples from properties like yours when you get in touch.

Survey first, works second

Every installation starts with a survey

We survey first, diagnose the true cause, and only then quote for the works. That way you pay for the right fix — not a guess. All remedial works and installations are carried out by our own qualified team and fully guaranteed.

CSTDB & CSSW qualified · Experienced · Professional · Local · Trusted · All works guaranteed